Q: I read your recent column on the Cambridge SoundWorks Oontz XL speaker. I received mine, and it works great with my iPad, but I'm confused about making a connection to my TV.

My TV doesn't have a headphone output or analog audio outputs, just an optical digital output. You said to use a converter with the TV's digital audio output, but I'm in the dark on what to buy. I went to Radio Shack, but it didn't seem to have anything.

Can you recommend products and instruct me on how to make the proper connection?

A: Here's how to use the speaker with a television's optical digital audio output. You can use this technique with other audio products, too.

Most TVs have an optical digital audio output for use with an external audio system. The Oontz XL has only Bluetooth and a miniplug auxiliary input. We need to change the TV's digital audio signal into an analog audio signal and send it to the Oontz XL miniplug input.

First, you need an optical digital audio cable. These are available online for $6 or less. There's no need to buy anything fancy, because a $5 cable will work just as well as a $500 cable. If your TV's screen is more than 37 inches, get a 6-foot cable. It's surprising how a 3-foot cable ends up being too short once you wrap it around TV stands and other things. A 6-foot Bluerigger optical cable sells for $6 on Amazon.

Connect the digital audio cable to the output on your TV.

Next, you need a converter. You'll probably need to go online to get one. The Sanoxy AGPtek Digital Optical Coax to Analog RCA Audio Converter Adapter has received good reviews on Amazon and sells for less than $17.

Connect the optical cable from your TV to the corresponding input on the converter and connect the converter to an electrical outlet with the supplied AC adapter.

The Sanoxy adapter has red and white RCA audio outputs, and the Oontz XL has a miniplug auxiliary input. You need an RCA-to-miniplug cable to connect them. You can get an RCA Stereo "Y" adapter plug for $2 on Amazon. This "Y" adapter does not have much cable length, so if you want slack between the converter and the Oontz XL, get a 3-foot RCA-to-miniplug cable instead. The cost is about the same. Connect the red and white ends to the adapter and insert the miniplug end into the Oontz XL auxiliary port.

Turn everything on and select the auxiliary input on the Oontz XL. Adjust the volume, and you will hear the TV sound come from the speaker.

With the digital output, you'll need to adjust the volume at the speaker. If you have a TV with a headphone output, you can connect it to the auxiliary input on the Oontz XL and control volume with the TV remote.

Send questions to donlindich@gmail.com. Get more recommendations and read past columns at www.soundadviceblog.com.