WASHINGTON — The Federal Aviation Administration recommends that airlines inspect the door plugs on certain Boeing 737s that are older than the Max 9 jetliner that suffered a blowout of a similar panel during a flight this month.
The FAA said door plugs on one older version of the 737, called the 737-900ER, are identical in design to those on the Max 9, and some airlines ''have noted findings with bolts during the maintenance inspections.''
The FAA issued a safety alert late Sunday. As soon as possible, airlines should visually inspect four places where a bolt, nut and pin secure the door plug to the plane, the agency said.
The door plugs are panels that seal holes left for extra doors when the number of seats is not enough to trigger a requirement for more emergency-evacuation exits. From inside the plane, they look like a regular window.
The FAA said that 737-900ERs have logged 3.9 million flights without any known issues involving the door plugs. By contrast, the Max 9 that suffered the blowout had made only 145 flights.
One of the two door plugs on an Alaska Airlines Boeing 737 Max 9 flew off the plane in midflight on Jan. 5. Passengers and investigators have described a violent decompression as air rushed out of the pressured cabin at 16,000 feet over Oregon.
The plane made an emergency landing with a hole in its side, and no serious injuries were reported. On a mostly full plane, no one was sitting in the two seats nearest the panel that blew out.
The FAA has grounded all Max 9s with door plugs instead of regular doors in the back of the cabin. Alaska and United Airlines are the only U.S. carriers to use the plane.
