Today I'm going to share a bit of home inspector folklore, and I'm going to set the record straight on electrical inspections.
We Can't Remove Panel Covers? I've heard from several other home inspectors in Minnesota that we're not supposed to remove electric panel covers. Yes, that's right. They say that only a licensed electrician is allowed to do this, and we as home inspectors have no business removing panel covers. This means that the inspection of the electrical panel is limited to looking at the panel cover and the circuit breakers... and that's about it. It would be like inspecting a house, but not actually looking inside (we call that a drive-by).
Where Does This Information Come From? The closest document I've ever seen that could possibly comment on a home inspector removing a panel cover in Minnesota is a document called THE LAWS AND RULES REGULATING LICENSING OF ELECTRICIANS AND INSPECTION OF ELECTRICAL INSTALLATIONS. There is a section in this document on page 15 that reads
So what is electrical work? This same document actually defines electrical work:
Removing a panel cover to inspect the inside does not constitute electrical work.
Inspecting the interior of electrical panels is also required by the Standards of Practice of the American Society of Home Inspectors (ASHI) and the National Association of Home Inspectors (NAHI).
ASHI SOP (7.1.A.5) says the inspector shall inspect interior components of service panels and subpanels.
NAHI SOP (9.2.3) says the inspector will inspect the main and branch circuit conductors for proper over-current protection and condition by visual observation after removal of the readily accessible main and sub electric panel cover(s).
