It's time for Minnesotans to consider removing snow from their roofs because of the weight.

Roof snow depth

Just two weeks ago I wrote a blog saying not to worry. At that time, roof snow loads were somewhere in the neighborhood of 15 pounds per square foot (psf), but that has changed dramatically over the weekend. With all of the rain and wet snow that we received, the weight of snow has gone way up.

I measured another section of undisturbed snow in my back yard just yesterday to see how we're doing. The weight of the snow was somewhere in the neighborhood of 35 - 40 psf. Yikes! That's quite a jump. With modern roofs having a design load of 35 psf, I'm no longer comfortable telling people not to worry about snow loads.

Roofs at risk

If you have large areas where a lot of snow drifts, you're going to have a lot of weight concentrated in these areas. If you have a flat roof or a low-sloped roof, you have a greater potential for problems. You probably don't need to worry about collapse... yet... but we have a lot more rain in the forecast for the rest of the week. Given the additional weight that this will add to roofs, it might be a good idea to remove snow. Today.

As I mentioned in my blog post on ice dams, using a roof rake is a good way to remove snow from the ground. Don't risk your life walking around on your roof to shovel the snow off. If you can't remove snow with a roof rake, hire a professional to remove the snow.

On the other hand, if you look up at your roof and you see a lot of bare shingles, or you have a very steep roof, you probably don't have much to worry about.

Here's a short clip from a story that I just did with WCCO News on this topic last night: https://youtu.be/LY-EkNAhCuo

Author: Reuben SaltzmanStructure Tech Home Inspections

Subscribe button

Older Post

Bath fan duct: metal or plastic?

Newer Post

Chimney inspections: pass or fail, nothing in-between