This image released by NASA on Saturday Feb. 9, 2013 shows a fresh drill hole, center, made by the Curiosity rover on Friday, Feb. 8, 2013 next to an earlier test hole. Curiosity has completed its first drill into a Martian rock, a huge milestone since landing in an ancient crater in August 2012.
, Associated Press
Robot spacecraft drills hole in rock on surface of Mars
- Article by: AMY HUBBARD
- Los Angeles Times
- February 10, 2013 - 6:56 PM
LOS ANGELES - For the first time, a robot has drilled into a rock on Mars and collected a sample, and scientists are patting themselves on the back.
The Curiosity rover extended its robotic arm and used the drill carried there to bore a hole 0.63 inches wide and 2.5 inches deep into John Klein, as the Martian rock was dubbed. Within that hole, scientists believe, is evidence of the wet environments that existed on Mars eons ago.
Hole has scientists swooning
The successful use of the drill alone has scientists in a tizzy. This means that Curiosity is "a fully operating analytical laboratory on Mars," said John Grunsfeld, with NASA's Science Mission Directorate.
"This is the biggest milestone accomplishment for the Curiosity team since the sky-crane landing last August," he said.
Twitter geeks were applauding: "Holey Mars exploration Batman!" tweeted Sustainable2.
Mission project manager Richard Cook said in January that the drilling was the most significant engineering that the team has done since landing.
Cook said the terrain was a big unknown and, thus, a big challenge. The area Curiosity rolled into is known as Yellowknife Bay, a place very different from the landing site at Gale Crater.
"It's like we entered a whole different world," said mission lead scientist John Grotzinger.
Developing the tools to tackle "unpredictable rocks" in unknown terrain required a lot of painstaking work beforehand, said Louise Jandura in Saturday's news release.
Jandura, of the Jet Propulsion Laboratory in La Canada-Flintridge, Calif., said, "To get to the point of making this hole in a rock on Mars, we made eight drills and bored more than 1,200 holes in 20 types of rock on Earth."
Now, for the analysis
On the ground, controllers will orchestrate the steps to process the sample. The powder created during the drilling travels up flues on the drill bit. Chambers in the bit assembly hold the powder until it is transferred to the Collection and Handling for In-Situ Martian Rock Analysis device. But you can call it CHIMRA. Inside the sample-handling device, the powder is vibrated across a sieve that screens out all but particles six-thousandths of an inch or smaller. Portions of the sieved sample fall through ports into the Chemistry and Mineralogy and Sample Analysis at Mars instruments, NASA says.
Then the detailed analysis starts.
The rock targeted in this momentous Martian occasion was named in honor of Mars Science Laboratory deputy project manager John Klein, who died in 2011.
© 2014 Star Tribune