In last week's blog post, which I did not post here on the Star Tribune, I mentioned that there is an upcoming seminar for Minnesota home inspectors, being taught by building code guru Douglas Hansen of Code Check. Minnesota currently uses the 2006 International Building Code (IRC), but we'll soon be adopting the 2012 IRC, and with that will come a lot of changes. The upcoming seminar will cover the most important parts of these changes.

I sent out an email notification to all of the Minnesota ASHI members letting them know about this seminar, and I've been making phone calls as well to make sure that everyone got the word.

I had one conversation with another Minnesota home inspector, who I'll call Inspector X, that prompted me to write this post. When I told Inspector X about the upcoming seminar that would be covering the code changes to the IRC, I said I considered this seminar to be 'must-have' training for any home inspector in Minnesota.

Inspector X said he disagreed that this is must-have training, because he doesn't conduct code enforcement inspections in any capacity. I didn't have time to engage at the moment, so I just told him he was right, home inspections are not the same as code enforcement inspections, but it's still important for us to be familiar with current building codes. I couldn't get him to agree with that either, so I basically just wished him well... but if I had had the time, I would have explained it this way:

ASHI Home Inspection Standards of Practice require home inspectors to provide clients with a written report that states those systems and components inspected that, in the professional judgement of the inspector, are not functioning properly, significantly deficient, unsafe, or are near the end of their service lives.

Unsafe is defined as "A condition in a readily accessible, installed system or component that is judged by the inspector to be a significant risk of serious bodily injury during normal, day-to-day use; the risk may be due to damage, deterioration, improper installation, or a change in accepted residential construction practices."

Current building codes are what define accepted residential building practices. If a home inspector is not familiar with current building codes, they're not familiar with accepted residential building practices.

Code Knowledge vs. Code Inspection

Even though home inspectors should be familiar with current building codes, this doesn't mean that home inspectors should report code violations. Our standards of practice clearly state that home inspectors are NOT required to determine "compliance of systems and components with past and present requirements and guidelines (codes, regulations, laws, ordinances, specifications, installation and maintenance instructions, use and care guides, etc.).

If you want to know the difference between a code compliance inspection and a home inspection, look at the reasoning behind the recommendations for change / repair. ASHI Standards of Practice require home inspectors to report the reasoning or explanation as to the nature of deficiencies reported that are not self-evident. If the home inspector bases their reasoning on code, they're heading into 'code compliance inspection' territory.

As an example, take a look at the sump basket cover at this new-construction home; the cover isn't airtight, which will allow for moist air to enter the home. This air may also bring radon gas into the home.

Here's a bad way for a home inspector to report on this: "The sump basket cover was not airtight, which is required by Minnesota Administrative Rule 1322.2103, Section AF103.4.4. Have this corrected."

The problem with this type of reporting is that it tells the client that this is a problem because the installation does not meet code... and that's about all. It doesn't give the reasoning or explanation as to the nature of this deficiency.

The proper way for a home inspector to report this type of defect would be "The sump basket cover was not airtight, which will allow for air to leak into the building. This air will have relatively high levels of moisture, and will contribute to radon gases coming into the home. Have the sump basket cover made airtight."

See the difference?

If the home buyer addresses this issue with the builder and asks them to correct this, the builder might say it already passed inspection and meets code. At that point, a home inspector who is familiar with building codes would be happy to give their client the above code reference, backing up their recommendation. That's a good thing, and it doesn't mean the home inspector is doing a code compliance inspection.

Author: Reuben Saltzman, Structure Tech Home Inspections