People like to complain about the new fluorescent light bulbs. The light isn't warm and friendly, the spiral bulbs don't fit their fixtures, and they don't last as long as claimed. But the biggest gripe I've heard is how hard it is to unload these bulbs, and that you have to pay for the privilege.

Incandescent light bulbs are easy: buy, burn and toss. But not so with compact fluorescent lights (CFLs).

It's against the law to put fluorescent lights in the garbage in Minnesota and several other states. Even if it weren't, you wouldn't want to do it. The bulbs contain toxic mercury, which requires special handling. The poison poses no threat when bulbs stay intact, but lamps break when trashed and mercury escapes. Once released, it can never be fully recovered, scientists say.

Often only a small amount of mercury, about 5 milligrams, is in a CFL. Yet research shows that's enough to render 6,000 gallons of water undrinkable, according to an MSNBC report. And the average household has 50 light sockets.

So why are environmentalists, federal and state governments and other authorities pushing fluorescent light bulbs? Because they are real energy savers.

"CFLs use about 75 percent less energy than standard lighting, produce 75 percent less heat, and last up to 10 times longer," according to the website of Energy Star, a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy.

But how can they be good for the environment if they contain mercury? Because so much energy is conserved, there's a net decrease in the amount of mercury released compared with what's released by the coal-burning power plants that produce electricity for conventional lighting, according to the Minnesota Pollution Control Agency (MPCA). In addition, the reduced electrical demand means fewer greenhouse gases are released.

Officials from some states and even other EPA departments advised Energy Star to put out an advisory on mercury information and proper disposal, said John Gilkeson of the MPA. A bill passed by Congress and signed into law by President Bush in December phases out traditional incandescent lamps, but there's no provision for disposal.

But getting rid of spent fluorescent bulbs might be easier in Minnesota than other states. Every county is part of a hazardous waste program, and nearly every program accepts these lamps, often free of charge, Gilkeson said. (A list is available on www.pca.state.mn.us/waste/lightbulbs.html).

So hold onto them until you have enough to warrant a trip to your county hazardous waste collection site, or wait until there's a seasonal collection event in your area. If you have to pay, it's typically 50 cents or a dollar, Gilkeson said, and you'll come out ahead. You might pay $5 more for CFL than incandescent, and pay another $1 for recycling, but over the bulb's lifetime, you could save $50 to $100 in electricity.

Some hardware stores have collection programs, with utilities offering coupons to offset disposal costs. Retailers such as Ikea collect them for free. For $15, Sylvania will send you a 15-bulb recycling kit. Once the 15 slots are filled, close up the box and mail it for recycling, postage paid.

Don't worry, you won't be doing it this way for long. Even better lighting technology is right around the corner, according to Stephanie Anderson of Osram Sylvania. LED (light emitting diodes) are only 5 to 10 years out, she said. They're more efficient, last even longer than fluorescent and there's no mercury to worry about.

Meanwhile, it makes sense to go fluorescent. Here are some solutions to common problems:

CFLs burn out early. Take them back to the store for refund or exchange. The life of a CFL is 8,000 to 10,000 hours; some are 4,500 to 6,000. Always buy the longest-life bulb, typically Energy Star-rated bulbs, Gilkeson said.

They come on dim and take awhile to warm up. CFLs can take 30 seconds to a minute to come to full light. They do, however, go off instantly.

They don't fit my lamp. Try a smaller bulb such as the Sylvania micro-mini Twist. The 15-watt CFL, equivalent to the 60-watt incandescent, fits where many standard CFLs don't. A harp extender might work. (The harp is the wire device on a lamp that holds the shade). They sell for about $2 at hardware and home stores.

I hate the harsh, white light of fluorescent. Read the label. Buy lamps with color temperatures listed at 2700K or 3000K to get the warm light that looks like incandescent light, Gilkeson said. Be aware that color quality can change in three-way bulbs, he said.

I want a bulb for a flood light, dimmer switch, electric eye fixture or entry door. Specialty fluorescent lights are available. Because your local home or hardware store might not have the right bulb or information on which bulb works with your fixture, you'll have to do some work. Gilkeson recommends www.doe.gov (search CFL), www.environmentallights.com, www.1000bulbs.com and www.bulbamerica. com for information. CFLs might not work with some older dimmers; you might have to update the control.

There aren't fluorescent lights available for every fixture, such as chandeliers, outdoor fixtures and appliances. The legislation signed into law last year does not apply to color and shaped bulbs, or for appliances, Anderson said. It is the common clear and frosted incandescent bulbs that will be phased out over the next six years.

They don't work in enclosed fixtures or recessed cans. Use the right bulb and pick the 13-, 20- or 23-watt CFL, Gilkeson said. (That translates to incandescent 60- to 100-watt range.) The best screw-in bulbs for cans, according to the US. Department of Energy, are made by GE, Osram Sylvania, Philips and Feit and are listed at www.pnl.gov/rlamps.

I'm afraid of breaking a fluorescent light. I have children in the house. If a fluorescent bulb breaks, open windows and outside doors, vacate the room, then start cleanup. After 15 minutes of ventilation, the Minnesota Department of Health recommends that you:

• Carefully sweep up the fragments, using something disposable. Do not use your hands.

• Wipe the area with a paper towel to remove all glass fragments. Do not use a vacuum cleaner.

• Use duct tape or something similar to clean up the remaining powder and residue (or for carpet cleanup).

• Place all fragments and cleanup utensils in a sealed plastic bag inside another bag and dispose of them at a hazardous-waste site.

Karen Youso • 612-673-4407